Sun-Sub

The Sun-Sub is a submersible pump and is the most popular Mono solar pump. Available with either a stationary or GPS Tracking array, it ranges from 150W up to 2400W.  These systems can produce very high flows and discharge pressures up to 150m.

Mono Sun-Sub solar pumping systems have helped thousands of farmers and remote villages solve their water supply problems. They have replaced windmills or diesel powered pumps on remote bores providing economic, trouble free and reliable water.

The Mono Sun-Sub solar pump provides its own power eliminating the need for diesel fuel or AC power.

The system is easily automated to turn on or off controlled by a float switch, pressure kit or built in electronic pressure control with float valves. Once your tanks and troughs are full, the pump will turn off, conserving water and reducing wear on the pump. The pump will turn itself back on again when more water is needed.

All Sun-Sub systems are supplied complete with pre-wired solar modules, array frames, pump element, submersible motor and solar motor controller.  The entire package is easy to assemble and all electrical connections are fitted with plugs & sockets so electrical connections, do not require an electrician.

Accurately select the best system to meet your requirements using CASS (Computer Aided Solar Selection) software.

Sun-Sub solar pumping systems can be further enhanced with the use of GPS Tracking solar arrays, AC PowerPak generator interfaces and Sun-Dial telemetry systems.

The Progressive Cavity (PC) helical rotor pump element used in borehole applications is proven to provide maximum water output even in bores containing silt or iron oxide, and low pump speed means extended rotor and stator life in abrasive bores.

The PC pump will deliver water with every rotation regardless of speed; on solar, when pump speed will vary with the amount of sun, it is important to get water with every turn of the pump.

The Sun-Sub fits in a 4” bore and its little brother the SB3 fits in a 3” bore.

Applications:

•  Water extraction from bore holes
• Wells
• De-watering    
• Creeks & Streams
• Watering stock    
• General water transfer
• Tube wells
• Irrigation
• Remote location water supply    
• Aqua culture

Features & Benefits

•  Solar power - no fuel costs, maximum power and water when you need it most
• Self contained - no need to connect AC power or transport fuel
• Simple design, proven technology - you can rely on it to work
• Supplied as a complete package - easy to install
• Highly efficient components - more water output
• CASS Selection Software -  helps you to select the best system for your application.
• Full 24-month warranty - peace of mind
• The rate at which water is pumped can be limited to suit the water source
• Built in pressure switch

Sun-Ray

The Monoflo Sun-Ray solar pump has been designed to transfer surface water with the same efficiency and reliability as other Monoflo solar pumps.  Available with either a stationary or GPS Tracking array, ranging from 150W to 1575W, the Sun-Ray can deliver very high daily flows up to discharge pressures of 120m.

The highly efficient, helical rotor pump is inherantly self-priming, so the pump can be positioned up to 6m above the water source, allowing the pump to be installed on top of dam walls or on river-banks above the high water mark.

The Sun-Ray is suitable for pumping water from springs, rivers, tanks and dams.  It is available with a floating pontoon that has been designed to safely enable the pump to float on a dam or other water source.

The PC (Progressive Cavity) helical rotor pump element used in the Sun-Ray pump is proven to provide maximum water output even in water containing silt or iron oxide, and low pump speed means extended rotor and stator life in abrasive bores.

The PC pump will deliver water with every rotation regardless of speed; on solar, when pump speed will vary with the amount of sun, it is important to get water with every turn of the pump.

All Sun-Ray systems are supplied complete with pre-wired solar modules, array frames, pump element, submersible motor and solar motor controller. The entire package is easy to assemble and all electrical connections are fitted with plugs & sockets, so electrical connections do not require an electrician.

Accurately select the best system to meet your requirements using CASS (Computer Aided Solar Selection) software.

Float and/or pressure switch input enables complete system automation. The Sun-Ray will only pump as long as water is needed and will stop once tanks and troughs are full.

Applications

• Surface water transfer
• Remote water supply for agriculture / livestock
• Medium scale irrigation
• Remote domestic water suppply
• Aqua culture
  

Features

• Solar power - no fuel costs, maximum output in sunny conditions when you need it most
• Self contained - no need to connect AC power or transport fuel
• Simple design, proven technology - you can rely on it
• Supplied as a complete package - easy to install
  
• Helical rotor pump - highly efficient, self priming
• Full 24-month warranty - peace of mind
• The rate at which water is pumped can be limited to suit the water source